William Atkin Cutter

From the Rocna Knowledge Base
Jump to: navigation, search
William Atkin Cutter
Manufacturer or yard: William Atkin Cutter
Model / series: NA or not provided
Number: 35
Designer(s): Not provided
Approx LOA: 12.5 m / 41'
Approx displacement: 11.8 metric tonnes / 26,000 lb

Rocna or Vulcan anchor bow compatibility

Vulcan20 The roller system on ROSA is a little strange and has a release lever to drop the anchor as self launch was not an option. It was designed by the original owner and housed a 35# CQR, which we discarded when we went to the Delta a few years ago, which at the time was an improvement.

Photoset – William Atkin 35

The anchor shown in these photos is a Vulcan 20 (44 lb).

Can you contribute?

If you have (or can get) some more pictures of the same type of boat (or others!) with a Rocna or Vulcan anchor, you can contribute to the Rocna Knowledge Base. Just send us some photos to help expand this page or create a new entry. Or, if you are a Rocna partner with an account, you can edit and contribute directly.