Browse wiki
From the Rocna Knowledge Base
| Compromis 888 |
| Depicts anchor | Rocna 10 (22 lb) + |
|---|---|
| Has boat type | Sailboat + |
| Has comments | Rocna 10 The bow of the Compromis 888 is … Rocna 10 The bow of the Compromis 888 is designed for plow type anchors like the CQR and will not accommodate the Rocna by default. But with a relative small adaptation of the bow roller I made, a perfect fit has been achieved. The roller has been moved approximately 45 millimetres (1.8”) in front and a bit lower than the original position. A small stainless steel plate protects the gel coat of the bow from accidental hits by the anchor point. from accidental hits by the anchor point. + |
| Has image | File:Rocna10 C888 ilCigno-bow.jpg + |
| Has imperial LOA | 29 + , 8,800 + |
| Has label | Compromis 888 + , Compromis 888 mod + |
| Has metric LOA | 8.8 + |
| Has metric displacement | 4 + |
| Has model or series | Compromis + |
| Has number | 888 + |
| Is built by | Zaadnoordijk, The Netherlands + |
| Was designed by | Frans Maas + |
| Categories | Rocna bow compatibility + |
| Modification dateThis property is a special property in this wiki. | 17 January 2017 17:33:33 + |
| Page has default formThis property is a special property in this wiki. | BoatCase SMW + |
| hide properties that link here |
| No properties link to this page. |